“ENTER PASSWORD” will be displayed. Enter
Master, Service or Operator Password.
Service = 222222
Operator = 111111
#1- To access the Operator Function menu, hold the <Cancel>, <Clear> and <Enter>
keys simultaneously for 2 seconds, release them and press 1, then press 2, then
press 3. The timing of this procedure can be difficult at first.
Note: The Operator Function menu can only be accessed when the machine is either
in service (“swipe your card” screen) or out of service. If the machine is attempting
to connect the host or initializing, you will not be able to use the key commands to
access the Operator Function Menu.
If you have trouble accessing the Operator Menu, power off the ATM and then either
open the vault door or remove the paper from the printer and power back on. This
will force the ATM to the Operator Menu.
2- Once you successfully completed the key
combination, you will be prompted to enter a
password. There are 3 options for passwords.
· Operator Password (allows access to basic
· Service Password (allows access to basic
and diagnostic menus)
· Master Password (allows access to all
menus including setup parameters)
Passwords are very important to maintaining
security for your ATM. Your
dealer/distributor will provide you with
default password information.
3- left is the complete Operator
Function menu, depending on which
password you entered (operators, service,
master) you may not see certain functions.
For example, if you use an operator password
you will not see the Host Setup button, as
you will not have access to that menu.
good luck ......